MKD Synchronous Motors | Indramat Motors
R911277398 (MKD090B-058-KG1-KN)
Rated 4 stars (7 total reviews)
In Stock, Ships Today Request a quote
Description
The R911277398 (MKD090B-058-KG1-KN) is a synchronous Servo AC motor from the Rexroth Indramat MKD Series. With a 24 VDC holding brake and electronic commutation, it runs at peak performance with both surface and natural cooling. It operates at a rated speed of 4000 rpm with a voltage constant of 70 V/1000min-1. This 4-pole motor has an initial shaft break-away needing a peak current of 79.0 amperes. It produces a continuous standstill torque of 12.0 N-m at 17.2 amperes. In natural cooling mode, it carries a rated torque of 8.9 N-m and a rated current of 9.2 amperes. Its maximum torque is 12 N-m with optional surface cooling. The brake pulls 0.71 amperes of current at 24 VDC, weighs 1.1 kg, and has clamping and release delays of 13 and 30 microseconds respectively. It comes with pre-greased bearings rated for 30,000 operating hours and a motor encoder for speed and position data.Specs
Type: AC
Brake Voltage: 24 VDC
Max Performance Cooling Modes: Surface Cooling, Natural Cooling
Rated Speed: 4000 revolutions per minute
Voltage Constant: 70 V/1000min-1
Poles: 4
Peak Current Needed: 79.0 amperes
Continuous Torque at Standstill: 12.0 N-m
Continuous Standstill Current: 17.2 amperes
Rated Torque (Natural Cooling): 8.9 N-m
Rated Current (Natural Cooling): 9.2 amperes
Max Torque with Surface Cooling: 12 N-m
Holding Brake Current: 0.71 amperes
Brake Clamping Delay: 13 microseconds
Brake Release Delay: 30 microseconds
Brake Weight: 1.1 kilograms
Bearing Life: 30,000 operating hours
Greasing: Not required nor recommended
Encoder: Data memory with control loop parameters
Brake Voltage: 24 VDC
Max Performance Cooling Modes: Surface Cooling, Natural Cooling
Rated Speed: 4000 revolutions per minute
Voltage Constant: 70 V/1000min-1
Poles: 4
Peak Current Needed: 79.0 amperes
Continuous Torque at Standstill: 12.0 N-m
Continuous Standstill Current: 17.2 amperes
Rated Torque (Natural Cooling): 8.9 N-m
Rated Current (Natural Cooling): 9.2 amperes
Max Torque with Surface Cooling: 12 N-m
Holding Brake Current: 0.71 amperes
Brake Clamping Delay: 13 microseconds
Brake Release Delay: 30 microseconds
Brake Weight: 1.1 kilograms
Bearing Life: 30,000 operating hours
Greasing: Not required nor recommended
Encoder: Data memory with control loop parameters
Fax: 1-919-867-6204
Shipping & Payment Options
Warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the MKD090B-058-KG1-KN.
Exchange
Want to sell your MKD090B-058-KG1-KN?
