Description

The Rexroth R911190202 (HDS04.2-W200N-HT28-02-FW) is a HDS series drive controller employed in digital motor control. It exhibits a rated current of 200 Amps, a peak current of 200 Amps, and a continuous current of 120 Amps at 4 kilohertz, and 80 Amps at 8 kilohertz. The power section frequency has an operating power loss of 800 Watts, and the 19-kilogram unit is housed in an IP 10 rated case that measures 498 x 265 x 150 millimeters. Within a DIAX 04 chassis, it’s possible to install multiple HDS and HDD series drive controllers that can be powered by a HVR/HVE series module fitted in the same chassis. This controller requires a minimum free space of 90mm to its front and 80mm above and 100mm below for optimal air-cooling effectiveness, necessary to maintain an ambient temperature of 5-45 degrees Celsius. The R911190202 (HDS04.2-W200N-HT28-02-FW) communicates via a SERCOS interface and requires a separate firmware order. This globally shipped product carries a one-year warranty from Indramat USA.

Specs

Rated Current: 200 Amps
Peak Current: 200 Amps
Continuous Current at 4kHz: 120 Amps
Continuous Current at 8kHz: 80 Amps
Operating Power Loss: 800 Watts
Chassis: DIAX 04
Power Supply Module Type: HVR or HVE
Housing Rating: IP 10
Housing Dimensions: 498 x 265 x 150 millimeters
Weight: 19 kilograms
Cooling Method: Air
Minimum Free Space in Front: 90 millimeters
Minimum Free Space Above: 80 millimeters
Minimum Free Space Below: 100 millimeters
Optimal Ambient Temperature: 5-45 degrees Celsius
Maximum Ambient Temperature: 55 degrees Celsius
Communications Interface: SERCOS
Function ID Code: 28
Function ID Version: 01
Firmware: Needs to be ordered separately

HDS Drive Controllers | Indramat Drives

R911190202 (HDS04.2-W200N-HT28-02-FW)

Request a quote

Description

Specs

Warranty

Repair

Exchange

Quick Links

Terms and Policies

North Carolina Office

Phone