The Bosch Rexroth R911271765 (HDD02.1-W040N-HD) Drive Controller, compatible with MHD and MKD motor series, serves either as a servo or a main drive. Connected to an HVR or HVE supply module, this second-generation DiAX04 controller family unit receives necessary power and signal voltages. Caution is advised due to the hot housing during operation. It's designed for commercial machinery installation and operation should adhere to safety specifications of the application and national safety regulations. The product must not be utilized without securely attaching the ground wire. Hands-on contact with the controller's electrical connection points, when live, is strongly discouraged. The device consumes 40W of power, and conforms to DIN 40 050 standards as indicated by an IP 10 protection category. The included SERCOS interface allows operation of digital drives and control units via optical fibers, consuming 1.5W. A 15-pin D-Sub X2 connector enables PC-controller communication. The product is available worldwide with a one-year warranty.
Specs
Can function as: Servo drive or main drive Required for functioning: HVR or HVE supply module Heat generation: High during operation Install purpose: Only in commercial machinery Command Communication: Through SERCOS interface Controller Family: DIAX04 Incompatible Machinery: Refinery plants, construction cranes, elevators Ground Wire Connection: Permanent requirement Power Consumption: 40W Protection Category: IP 10 as per DIN 40 050 specifications SERCOS Interface Power Consumption: 1.5W Extra Feature: X2 connector for PC-controller communication X2 Connector Type: D-Sub with bushings, 15 pins Global Shipping: Available