MDD112A-N-015-N2M-130PB0

Description

The MDD112A-N-015-N2M-130PB0 is an industrial-grade servo motor produced by Bosch, equipped with a built-in multiturn encoder and digital servo feedback capabilities. It features a motor flange designed for B5 and B14 mountings, utilizing screws via througholes for secure installation. Notably, care is required when installing with the shaft upwards, as prolonged liquid collection at the output could damage internal components of the motor. The motor also includes a keyway-equipped shaft for effective torque transmission, ideal for lower load operations. An additional shaft seal is present to inhibit potential liquid penetration into the motor housing. With an IP65 protection rating, the MDD112A-N-015-N2M-130PB0 motor primarily cools through natural convection, although for intense loads, a separately orderable surface-cooling unit operating at either 115 or 230 Volts AC can be mounted. The cooling system may utilize either axial or radial surface cooling mechanisms, depending upon the required application. Its nominal speed lies at 1500 RPM, and the power connector can be found on side B. Please note that this model does not include a blocking brake.

---