The Bosch Rexroth R911200209 (RD51.1-4N-001-L-NN-FW) Drive Control is a sophisticated device with a nominal supply voltage range of 3 x 380 - 480VAC, providing U/f curve control. Supplied as-is, without modifications, this unit controls and monitors motor operation and requires initial programming to ensure application-specific functions are performed efficiently. In case of faults, the automatic fault display overrides the normal operating display. The device features multi-level parameters and notable functions including overload protection and the capability to prevent accidental startup post-fault. With a forced-air cooling mechanism, the drive control can operate up to a maximum temperature of 50°C with derated data. Compliance to EN 55011 standards ensures top-notch radio interference immunity and the unit can function as a converter if needed. It comes with a year-long backup support and is suited for use in commercial machinery only. Maintenance should only be performed once the unit has fully cooled down to prevent electrical shocks.
Specs
Product Type: Drive Control Control Type: U/f curve control Nominal Supply Voltage: 3 x 380VAC to 480VAC Voltage Tolerance: +/-10% Fault Display: Yes Parameterization: Two types Overload Protection: Yes Cooling Mechanism: Forced Air Maximum Operating Temperature: 50°C Radio Interference Immunity: A1 Functionality: Converter, not in-built chopper Support: One year backup Cooling Time: Post operation before maintenance Suitable Installation: In commercial machinery Protective Ground Connection: Required Shipping: Global Use with Residual Current Operated Protective Equipment: No