The R911306533 (HNF01.1A-F240-R0065) is a high-performance mains filter specifically designed for drive controllers and power converters. It possesses a nominal current rating of 65A and a power dissipation of 163W. UL Listed and CSA Certified, this filter is suitable for use with six-axis drive controllers over a maximum connection length of 240m. It’s necessary to maintain an 80mm clearance above and below for optimal functioning. The filter tolerates +/-10% variance and an input frequency fluctuation of +/-2Hz. It is equipped to handle a peak current of 163A and can be used with up to 12 drives. Not designed for three-phase mains voltage at IT and corner-grounded-delta mains, its terminal connection has a maximum cross-section of AWG 4 or 25mm2 and a maximum tightening torque of 4.5Nm. The filter is dispatchable globally with a one-year warranty.
Specs
Certification: UL Listed and CSA Certified Nominal Current Rating: 65A Applicable Controllers: Six-Axis Drive Controllers Maximum Connection Length: 240m Power Dissipation: 163W Required Isolation: Isolating Transformer Mounting Orientation: Normal Space Requirement: 80mm top and bottom Tolerance: +/-10% Tolerance Input Frequency: +/-2Hz Maximum Peak Current: 163A Simultaneous Drive Use: Up to 12 drives Supported Motor Type: Asynchronous Servomotors Input Terminals Max Connection Cross-Section: AWG 4 or 25mm2 Input Terminals Max Tightening Torque: 4.5Nm Mounting Screws Max Tightening Torque: 8.6Nm Location of Mounting: Inside a Control Cabinet Connection Type: Fiber Optic Cables Intended Function: For Drives with Long Motor Cables Restrictions: Blowers and Pumps not allowed near filter.