1-888-551-3082 | 1-919-443-0207 | [email protected]

DKR Drive Controllers | Indramat Drives

R911268385 (DKR02.1-W300Z-BE23-01-FW)

Rated 4.9 stars (14 total reviews)
  Call For Quote

Request a quote

Description

The Bosch Rexroth R911268385 (DKR02.1-W300Z-BE23-01-FW) model is a cutting-edge drive controller used in diverse industry sectors. It benefits from multiple cooling methods, with duct cooling being recommended due to its efficacy in dissipating 1200W of heat with the built-in blower unit. The controller can be used up to an ambient temperature of +45 degrees Celsius without any reduction in drive data. It must be operated with a minimum clearance of 160mm at the air intake and outlet, and used only with approved accessories and motors. Before commencing operation, it must be suitably configured and programmed using the DSM 2.3 software module. It communicates via the SERCOS interface, and can be installed up to 1000 meters above sea level without derating. The R911268385 (DKR02.1-W300Z-BE23-01-FW) operates at a rated voltage of 3x400 – 480V, a rated current of 300A, and employs an auxiliary bleeder resistor.
Specs
Heat Dissipation: 1200 W
Ambient Temperature for Operation: +45 degree Celsius
Minimum Clearance for Air Inlet and Outlet: 160 mm
Rated Operational Voltage: 3 × 400 – 480 V
Rated Current: 300 A
Control Voltage: AC 230 V
Communication: SERCOS interface
Additional Plug-in Card Slots: U2 – U4
Altitude for Mounting: Maximum 1000 meters above sea level
Ingress Protection: IP20
Software Module: DSM 2.3 installed into U5 slot of the basic unit
Shipping & Payment Options
DHL-logo FexEd-logo UPS-logo freight-icon

AmEx-icon Mastercard-icon Visa-icon wire-transfer-icon
Warranty
1-year-warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the DKR02.1-W300Z-BE23-01-FW.
Indramat Is Trusted By
motion-industries-logo
3m-logo
IBM-logo
GexPro-logo
caterpillar-logo
nasa-logo
ford-logo
vallen-logo