PPC Controllers | Indramat Controls
1070170292 (PPC-R22.1N-T-L2-NN-NN-FW)
Rated 4.6 stars (12 total reviews)
In Stock, Ships Today Request a quote
Description
The Bosch Rexroth 1070170292 (PPC-R22.1N-T-L2-NN-NN-FW) PPC series CNC module is a compact, flexible, and powerful machine control solution, especially when paired with the MTS-R01.2 PLC control unit. Its optional sockets can accommodate an axis processor module. The on-board SRAM stores application-specific NC data which can be lost if the lithium battery is fully discharged. It is not compatible with MTC-P or MTC-R active-axis processor modules. Firmware loading for APR and CPU components requires the presence of a boot monitor or loader. The equipment integrates the COM diagnosis serial interface settings. It should not be used in situations with high temperature fluctuations or without a qualified operator. Temperature-controlled storage between -25°C and 70°C is recommended alongside the appreciation of relative humidity of 5% to 95% during transport or storage. It comes with a one-year global warranty.Specs
Compatible With: MTS-R01.2 PLC Control Unit
SRAM Storage: Application-specific NC data
Prohibited Axis Processor Modules: MTC-P, MTC-R
COM Diagnosis Serial Interface Settings: 9600 Baud, 1 stop bit, no parity, 8 data bits
Use Case: Machining Centers
Operating Environment: Temperature fluctuations not suitable
Storage and Transport Temperature: -25°C and 70°C
Relative Humidity: 5% to 95% during transport and storage
Power Supply Cable Cross-Section: 0.75mm2 to 1.5mm2 based on current requirements
User Requirement: Qualified and trained personnel
Installation Requirement: Inside a switch cabinet
Module Rack System: Cannot be used to control the CNC module
Delivery: Worldwide delivery available
SRAM Storage: Application-specific NC data
Prohibited Axis Processor Modules: MTC-P, MTC-R
COM Diagnosis Serial Interface Settings: 9600 Baud, 1 stop bit, no parity, 8 data bits
Use Case: Machining Centers
Operating Environment: Temperature fluctuations not suitable
Storage and Transport Temperature: -25°C and 70°C
Relative Humidity: 5% to 95% during transport and storage
Power Supply Cable Cross-Section: 0.75mm2 to 1.5mm2 based on current requirements
User Requirement: Qualified and trained personnel
Installation Requirement: Inside a switch cabinet
Module Rack System: Cannot be used to control the CNC module
Delivery: Worldwide delivery available
Fax: 1-919-867-6204
Shipping & Payment Options
Warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the PPC-R22.1N-T-L2-NN-NN-FW.
Want to 
